David Wood Floors, Inc. omaha wood floor installation
omaha hardwood floors omaha wood floor refinishing
hardwood floors
 

Choosing who will repair, sand, and finish your wood floor is just as important as the floor itself.

We at David Wood Floors, Inc. Pride ourselves in the quality of our workmanship and follow NWFA specification and honor time proven techniques that provide you with the best finished results, as well
as using superior products.

We strive to make your existing wood floor the best that your existing wood can be. Even if that old floor
had been covered with linoleum or tile or rugs before it was uncovered.

Individual Boards can be replaced, cold air returns that are currently only plywood can be patched and new wood put in place so that you will never know it was patched.

Boarders and inlays of wood can be added to an existing wood floor to make the floor a unique part of your home.

WHAT YOU CAN EXPECT FROM US
SANDING AND REFINISHING YOUR WOOD FLOORS WILL ADD VALUE AND BEAUTY TO YOUR HOME, BUT AS WITH ANY HOME IMPROVEMENT YOU SHOULD EXPECT SOME DISRUPTIONS AND INCONVENIENCE. WE WILL EMPLOY OUR EXPERIENCE, THE LATEST EQUIPMENT AND THE MOST ENVIRONMENTALLY SAFE MATERIALS TO COMPLETE THE WORK WITH THE LEAST DISRUPTION. HOWEVER, YOU SHOULD BE AWARE OF THESE FACTORS:
PRE-JOB SITE SANDING REQUIREMENTS:
THE BUILDING SHOULD BE COMPLETELY CLOSED IN, WITH OUTSIDE WINDOWS, AND DOORS IN PLACE.
ALL OTHER TRADES SHOULD HA VE COMPLETED THEIR WORK AND NO OTHER TRAFFIC SHOULD BE ALLOWED DURING THE SANDING AND FINISHING PROCESS.
AIR CONDITIONING, HEATING, AND VENTILATION SYSTEMS SHOULD BE OPERATING.
THE TEMPERATURE AND RELAnVE HUMIDITY SHOULD BE AT 'NORMAL LIVING CONDITIONS."
FURNITURE, APPLIANCES AND OLD FLOOR COVERINGS SHOULD BE REMOVED DURING THE ENTIREPROCESS
SANDING AND FINISHING EXPECTIONS
THERE WILL BE NOISE, DUST AND SOME V APORS DURING THE SANDING AND FINISHING PROCESS.
EVEN THOUGH WE WILL SEAL OFF THE WORK AREAS FROM OTHER ROOMS, DUST FROM THE SANDING PROCESS COULD INFILTRATE TO OTHER AREAS OF THE HOUSE.
BECAUSE OF THE V APORS THAT WILL BE RELEASED DURING THE FINISH APPLICATIONS, PILOT LIGHTS MAY NEED TO BE TURNED OFF.
PLEASE KEEP PETS AND CHILDREN FROM THE WORK AREAS.
A TYPICAL FINISH JOB (APPROXIMATEL Y 1,000 SQUARE FEET) TAKES
ABOUT 2 DAYS OF ACTUAL SANDING, WITH ONE DAY FOR THE STAIN TO DRY
-MEANING A FULL DRYING DAY, ON THE THIRD OR FOURTH DAY THE FIRST APPLICATION OF FINISH IS DONE AND EACH FOLLOWING CONSECUTIVELY FOR A TOT AL OF THREE COATS OF FINISH.
OUR WORK HOURS ARE FROM 6:45 a.m. to 4 p.m.
WHEN THE WORK IS COMPLETED YOU MA Y FOLLOW WITH TOUCH UP PAINTING TO THE BASE SHOE AND TRIM. PAINTING SHOULD AL WAYS FOLLOW FLOOR SANDING WORK.
GENERAL CLEAN UP OF DUST MUST ALSO FOLLOW THE WORK
FINISHES REQUIRE CURE TIME, ALTHOUGH THEY MAY APPEAR DRY ON THE SURF ACE IT IS BEST TO ALLOW AT LEAST 10 DAYS FOR RUGS OR ANY HEA VY FOOT TRAFFIC.
AFTER THE JOB IS COMPLETED YOUR ESTIMATOR WILL GO OVER THE JOB WITH YOU ON SITE AND MAINTENANCE PROCEDURES WILL BE REVIEWED .
  HOME : ABOUT US : PORTFOLIO : SERVICES : PUBLICATIONS : CONTACT : LINKS